Glass Bong Adapter 14,5 mm / 14,5 mm

Glass Bong Adapter 14,5 mm / 14,5 mm

• First connection size14,5 mm
• Second connection size14,5 mm

This model serves as a glass connector, maintaining the nominal 14,5 mm size between its first and second connections. It is useful when two components need an adapter between them but do not require a change in nominal diameter.

The adapter has two connections specified with the same nominal measurement: 14,5 mm on one side and 14,5 mm on the other. It therefore connects compatible parts rather than reducing or increasing the joint size.

This design provides a straightforward connection when a separate glass component is needed between the bong and an accessory. However, a matching size alone does not guarantee structural compatibility: both parts must also have connection types that fit the appropriate ends of the adapter.

Before connecting the parts, compare the specifications of the body, adapter, and accessory being attached. Both ends of this model measure 14,5 mm, so the adapter will not solve a mismatch where one part requires a different nominal size.

The socket and end configuration also matter. Parts of the same size can serve different roles, so they should form a suitable pair and seat evenly, without play or forcing the connection.

• Compare the nominal sizes of both connecting parts
• Make sure the end types form a compatible pair
• Do not force parts that offer noticeable resistance

Installing and cleaning the glass

Insert the glass adapter gently, keeping the parts aligned and holding them close to the point of contact. Excessive pressure or sideways leverage increases the risk of damaging the glass and ground-glass joints.

After use, separate the parts without tugging and clean the adapter with a cleaner intended for glass. Before reassembly, the connection surfaces should be clean and dry so residue does not interfere with proper seating.

See Also

• CategoryAdapters→